lamp replacement parts

Lamp Replacement Parts - For Do It Yourself Repair

There are many lamp parts and accessories for you to choose from for your lamp. When you need a part for your lamp, it is best to know the part number, as well as the style of the lamp that you need the part for. You should also know about lamp replacement parts as well.

Incandescent lamps are made up of a plug, cord, switch, socket, and the body. Over time parts wear out and have to be replaced. Find out more about lamp replacement parts for easy lamp repairs.

If your lamp quits works start by testing the light bulb. Then check the receptacle by plugging the lamp into another receptacle. Next check the plug and the cord for damage such as broken contacts, wear, or wires showing.

Before doing any work on your lamp make sure it is unplugged. Lamps put together with nuts and bolts can be disassembled for repair. However if your lamp is riveted you'll be unable to repair and have to buy a replacement. Here's how to replace lamp parts.

1. Cord

Disconnect the old cord by simply cutting it off with a pair of wire cutters. Leave about 3" below the bottom of the lamp. Now tape the new cord to the 3" piece using electrical tape and then pull the new cord up through the stem of the lamp by pulling the old cord out from the top. Once it's pulled through you can discard the old cord.

2. Socket

Remove the old socket then pull up the old cord and cut below the underwriters knot. Now slip the replacement socket cap onto the cord. Tie the wires into underwriters knot. Next strip " of insulation of each of the wires, twist the strands together, and then fasten the wires to the socket screws. Silver goes on silver and the other goes to the brass. Now pull the cap over the underwriters know and reassemble.

There are all kings of incandescent fixtures including chandeliers, ceiling fixtures, wall mounts and more. Some have one bulb while others may have several. The following are instructions for repairing fixed mounted lighting that is wired directly into your homes wiring system.

If you've checked the bulb and it's fine you'll need to check the circuit and the light switch next. Shut the power off to the circuit then remove the fixture from the ceiling and examine for any loose connections....

Page 2: Lamp Replacement Parts - For Do It Yourself Repair

Related Articles

Lamp Repair Parts - The Essentials

Switches that are a separate entity from the lamp's socket, especially those in the base, are quite easy to repair. Just disconnect the wires from the switch, remove the old switch, replace with a new switch and reconnect. If the lamp has a felt base on the bottom you might have to gently peel...

Replacement Lamp Shade - Know When To Get One

Any more will throw the balance of the lamp off. The width of the shade needs to extend past the widest part of the base of the lamp and it needs to be long enough to cover all electrical fittings and the socket. 3. Shape The shape of the shade should reflect the shape and curves of the lam...

---