lamp replacement parts 2 Page 1

Lamp Replacement Parts - For Do It Yourself Repair - 2

...If you see any tighten them up. If it still isn't working you can replace or repair following these steps.

1. Replace The Fixture

If you have to replace the light fixture start with the main power shut off take the bulb out of the fixture then unscrew the cap nuts. This will free the light from the ceiling box. Disconnect the old fixture. Strip " off the wires on the new fixture; now wrap the bare ends around the circuit wires then bent over.

Next install the wire nuts and slowly slide the new fixture onto the screw for the ceiling box. Screw on the cap nuts, check that the fixtures secure, and then replace the bulb. Turn the power back on and check the fixture. If it's working your problem is solved. If it's not you've got bigger problems.

2. Replace the Pre-Wire Socket

Turn the main power off to the fixture and remove the shade. Unscrew the screws to free the fixture. Next unscrew the wire nuts. This will disconnect the socket wires from circuit wires. Unclip the faulty socket and then remove it. Push the wires through to attach the new socket. Now splice them into the circuit wires with wire nuts. Reattach the fixture and replace the shade. Turn the power on and test.

3. Rewire A Chandelier Arm

Turn the main power off then remove the sleeve and detach the wires from the terminal screws on the socket. Next unscrew the socket and remove the cap that is under the fixture. You need to temporarily tape the new socket wires to the old wires. Now you need to detach the old wires from the main cord and then pull the new wires through. Next screw on the new socket and connect the new socket wires. Now you can remove the old socket wires. Put the fixture back together, turn on power on and test.

Once you've picked up your lamp replacement parts the repairs are relatively simple to do.

Now that you know all about lamp replacement parts, you are ready to get down to actually buying the part or accessory that you are needing for your lamp. You will find that with so many to choose from, you need to be sure that you take color and style into consideration while you are choosing and shopping.

Related Articles

Lamp Repair Parts - The Essentials

Switches that are a separate entity from the lamp's socket, especially those in the base, are quite easy to repair. Just disconnect the wires from the switch, remove the old switch, replace with a new switch and reconnect. If the lamp has a felt base on the bottom you might have to gently peel...

Replacement Lamp Shade - Know When To Get One

Any more will throw the balance of the lamp off. The width of the shade needs to extend past the widest part of the base of the lamp and it needs to be long enough to cover all electrical fittings and the socket. 3. Shape The shape of the shade should reflect the shape and curves of the lam...

---